Precast decoration is an important part of the four buildings, “steel essentials for the development of building industrialization” It is pointed out that by 2025, the proportion of precast buildings in new buildings should reach more than 50%.

The chain business has the high-frequency demand for wall disassembly and replacement, and the assembly decoration can realize the standardization and rapid completion of the whole process from production to construction.

2.

（6） What are the cast product systems? Partition system, wall finish system, ceiling system, ground system, kitchen and bathroom system III.

It can be seen that precast decoration has significant advantages in the industry, which can truly realize the whole process informatization of decoration, reduce the comprehensive cost, and ensure green environmental protection at the same time.

Shorten the construction cycle; 2.

From 3D measurement to automatic modeling, one-piece typesetting calculation and automatic typesetting It is very close to the industrial 4.0 system.

The precast decoration is mature, perfect and can be copied in batches, which can comprehensively solve the problems of wall, ground, roof and bathroom of affordable housing and apartments.

Easy to repair and recyclable.

There are many assembly application scenarios, such as government talent apartment, affordable housing and centralized apartment, which are in the period of rapid development.

II Understanding of cast decoration (I) what is cast decoration? Fabricated decoration is a kind of decoration in which industrial workers carry out dry construction according to standardized vehicles through reliable assembly of parts and components produced in industrialization.

Move in immediately after completion; 4.

（2） Market prospect of precast decoration 1.

I Pain points of traditional decoration market （1） Problems faced by traditional decoration the process of traditional decoration design is relatively complex, including ground engineering, wall engineering, hydropower engineering, ceiling engineering, door and window engineering, etc.

Rebar Support Chair

From the perspective of the whole industry, the decoration industry has a large scale, with a total annual output value of more than 3.5 trillion.

Three policy tendencies: mandatory requirements for prefabrication rate and assembly rate, full decoration and delivery of new urban houses, and large-scale construction of centralized rental houses.

（2） What problems can assembly solve? 1.

Precast decoration is the direction encouraged by national policies.

In addition, precast decoration is also suitable for home decoration, hotels, container rooms, offices, hospitals, schools and other scenes.

Reduce noise pollution; 3.

In addition, with the changes of people’s living standards and lifestyles in modern society, the decoration style and function configuration of traditional decoration are more and more difficult to meet the needs of customers.

In summary: the decoration cycle is too long and the manual technical requirements are high; Unable to move in in time after completion, and formaldehyde exceeds the standard; Construction noise is loud and there is much decoration waste; The decoration budget is uneven and there are many hidden costs.

If cheap and poor quality materials are used or important steps are ignored in order to catch up with the construction period, the subsequent maintenance cost will increase, which is also equivalent to It increases the cost, so in terms of hard decoration, we should put quality first and do a good job in quality, especially without paying attention to the problems of water and electricity.

(III) what is the difference between tradition and assembly? (IV) R & D – production – Design – Construction – Software of the industrial chain of assembly decoration （5） The project process of assembly decoration can be fully laid out, platformized, standardized, modularized and digitized, so as to realize the information cooperation of the whole process and run through the whole life cycle of the project.

Reduce manual skill requirements; 5.

the quality of hard decoration directly affects the subsequent occupancy.

BIM + cast decoration cast decoration BIM system: the BIM system based on cast decoration can truly realize the digital connection between the business end and the manufacturing end and improve the efficiency of the industry.

4、 Application scenarios: hardbound houses, hardbound apartments, hotels, real estate projects, Chain Commerce, modular products, bureau reform, etc.

However, such a large industry has a low degree of industrialization, low industry concentration, low operation efficiency and informatization level, shortage of decoration workers and rapid rise in costs.

Long press.