The Notice on Publicly Soliciting Opinions and Suggestions from the Notice on Strengthening the Quality Management of Precast Building Projects in the Autonomous Region (Draft for Comments), in order to promote the sustainable and healthy development of precast buildings in our region, standardize the project quality behavior of all parties involved in the construction, ensure the quality of precast building projects, and improve the engineering construction organization and quality safety management system that adapt to the development of precast buildings, according to the Regulations on the Quality Management of Construction Projects and other laws Regulations, the specific requirements of the Guiding Opinions on Vigorously Developing Precast Buildings issued by the General Office of the State Council (GBF [2016] No.

The design unit shall specify the structural construction drawing and fabrication details of precast components and fittings in the structural design drawing to facilitate the processing and construction of precast components and fittings..

Establish a whole process traceable quality information management system, promote the use of building information model (BIM), building networking and other technologies, and implement the whole process quality control of precast buildings from the aspects of design, materials, parts production, on-site construction, etc.

During this period, relevant units and people from all walks of life can put forward opinions and suggestions through the following ways and means.

Encourage technological innovation of design, component production and construction enterprises, actively adopt new materials, new technologies, new processes and new equipment that are energy-saving and environment-friendly, support enterprises to summarize and refine construction methods, and improve the technical level of assembly construction.

5.

The construction unit shall organize experts to demonstrate the new materials, technologies, processes and projects that should be demonstrated according to relevant regulations.

Promote the standardized design, factory production, assembly construction, integrated decoration, information management and intelligent application of precast construction projects, and promote the improvement of the quality and technical level of precast construction projects through the reform of construction methods.

When entrusting project supervision, the contract shall specify that the supervision unit shall supervise the production of components in the factory and urge the supervision unit to implement.

2、 Implement the quality responsibilities of all parties in the precast construction project (I) Quality responsibilities of the construction unit 1.

2.

Contact: Hou Rui Tel.: 18099220372 Email: 470489450@qq.com Attachment of the Department of Housing and Urban Rural Development of the Autonomous Region on October 16, 2022: Notice on Strengthening the Quality Management of Precast Building Projects in the Autonomous Region (Draft for Comments) by local, prefectural and municipal housing and urban construction bureaus (construction bureaus), Kashgar Economic Development Zone Planning, Land Construction and Environmental Protection Bureau, and Horgos Economic and Technological Development Zone Planning, Construction and Environmental Protection Bureau: To promote the sustainable and healthy development of precast buildings in our region, Standardize the engineering quality behaviors of all parties involved in the construction, ensure the quality of precast buildings, improve the engineering construction organization and quality safety management system that adapt to the development of precast buildings, and in accordance with the Regulations on the Quality Management of Construction Projects and other laws, regulations and provisions, and the Guiding Opinions on Vigorously Developing Fabricated Buildings issued by the General Office of the State Council (GBF [2016] No.

（2） Support the innovation of engineering technology and methods.

Give priority to the design procurement construction (EPC) project general contracting mode to ensure a reasonable construction period, advocate the use of the whole process cost management, and the construction unit shall timely allocate the project funds in full.

The construction unit shall, according to the characteristics of the precast building project, coordinate the quality management of the project as a whole, assume the responsibility for the comprehensive management and coordination among the parties involved in the precast building design, component fabrication and construction, and promote close cooperation among the parties involved in the project.

4.

The design unit shall specify the structural performance inspection requirements of main precast stressed members and measures such as joint waterproof structure in the design documents.

The time for this public solicitation of opinions and suggestions is from October 16, 2022 to October 31, 2022.

71) The Implementation Opinions on Vigorously Developing Precast Buildings in the Autonomous Region (XZBF [2017] No.

When major changes such as structural safety, main use functions, energy conservation, important building materials and assembly rate changes are involved, the original construction drawing review organization shall be entrusted to review again.

The construction unit shall strictly implement the capital construction procedures and entrust the construction drawing design documents to the construction drawing review organization for review.

Implement the model guidance system, and the construction unit shall organize relevant subjects of project construction to implement the model guidance system for the main structure of precast buildings, precast components and fittings, mechanical and electrical installation, decoration and other sub projects.

Take the primary responsibility for the quality of precast construction project.

71), the Implementation Opinions on Vigorously Developing Precast Buildings in Autonomous Regions (XZBF [2017] No.

187) and 16 departments including our department jointly issued the specific requirements of Several Opinions on Further Promoting the Development of Precast Buildings in the Autonomous Region.

（3） Implement the means to improve the quality of informatization.

Fixing Socket Waved End

The design unit shall clearly define the structural type, assembly rate, precast component parts, precast component types, and construction practices among precast components of precast buildings in the construction drawing design documents, and propose design requirements and technical descriptions for possible major risks.

6.

7.

3.

（2） Quality responsibility of the design unit 1.

3.

2.

187), and the Opinions on Further Promoting the Development of Precast Buildings in Autonomous Regions jointly issued by 16 departments including our Department, combined with the actual situation of our region, The Department of Housing and Urban Rural Development of the Autonomous Region has drafted the Notice on Strengthening the Quality Management of Precast Construction Projects in the Autonomous Region (Draft for Comments), which is now open to the public for comments.

The construction unit shall pay attention to the review of the detailed design documents submitted by the construction unit and the component manufacturer, organize the design, supervision and other relevant units to carefully check and review, and sign the review opinions from multiple parties before implementation.

In combination with the actual situation of our region, the following opinions are put forward on strengthening the quality management of precast buildings: I Improve the quality and technical level of precast construction projects (I) Improve the quality level of assembly.