After professional training, workers only need to install according to the standardized process, which is simple and convenient.

These problems are the root causes affecting the efficiency and controllability of decoration projects.

Therefore, the construction volume is reduced and the construction period is shortened.

Root cause 1: traditional decoration · on-site wet operation traditional decoration adopts the method of wet operation, and many steps are implemented on the project site, such as leveling with cement mortar, plastering, pouring, wet tiling materials, wet tiling stones, etc.

If you want to open windows for ventilation according to the suggestions of experts, ranging from 3 months to 1 year, for operating properties such as hotels, vacant for a few months will greatly increase the cost.

Therefore, it is not affected by climate change and can be constructed all year round.

The main body of the building is separated from the interior decoration, and there is no need to open a wall, drill a hole and route the cavity.

All decoration parts are produced in the factory with high accuracy, and then transported to the site for installation, just like Lego, which avoids the deviation of workers’ technology and has a higher guarantee for the final decoration effect.

At present, the construction industry is often criticized by people and is still in the handicraft era, because it highly depends on the craftsmanship of workers, which can be passed down from teacher to apprentice and practiced for a long time.

This is why there is a winter break in traditional decoration, and there is no way to rush with money.

Root cause 4: the pollution of traditional decoration construction is difficult to control, and the decoration pollution is stronger than the tiger.

Only carpentry is required, simplifying the process.

Decoration is a complex large project, and hotel decoration is no exception.

Source of the current situation of the decoration industry 3: the traditional decoration process is complicated.

In particular, modern people pay more attention to health preservation, and are more sensitive to decoration pollution.

In China, decoration workers are called “migrant workers”.

The complexity of decoration leads to long construction period and great uncertainty.

It involves more than a dozen types of work, large and small, and dozens of workers come and go.

Waved Anchor

Industrial production simplifies the process, standardized process, and assembly decoration reduces the types of work.

In case of cloudy, rainy and cold weather, the construction waiting time will be prolonged.

Only assembly is required on site.

In the process, it is not only difficult to control the quality and dosage of adhesive, but also the aggregation effect of every bit of pollution source of decoration products in a small space is enough to form pathogenic pollution.

Among them, the most important link with the largest investment cost and directly related to the rate of return on investment is decoration and transformation, which may account for more than 90% of the total investment of the project.

Why does news problem arise? Traditional decoration inefficient assembly decoration has been developed in China for many years.

However, investing in a hotel often costs millions, so we need to carefully calculate the rate of return on investment.

They receive professional training, have a high social status and are respected by the whole people.

Both human factors and environmental factors may lead to the extension of construction period, which seriously affects the opening time and normal operation of the hotel.

In order to change the problem of slow traditional decoration, precast decoration has emerged as a new decoration technology to change the traditional decoration mode, and has become faster and more stable in the development and improvement of the industrial chain, making the decoration on the fast lane.

Keel wallboard installation & keel free wallboard installation factory production splicing efficient and accurate assembly decoration establishes the indoor decoration on the modular design.

With more diversified career choices, fewer and fewer young people are willing to engage in this career, and good skills are facing loss, which leads to the uneven level of decoration workers and few skilled workers in the market, which is difficult to meet the business needs of rapid hotel decoration and rapid opening.

In Japan, which is famous for its “craftsman spirit”, powerful decoration craftsmen are called “workers”.

Full dry operation, no construction, intermittent assembly decoration, full dry operation, dry leveling layer instead of cement mortar leveling, and there is no need to brush the wall surface on three bottoms and two sides.

Many of them have not received professional training, learn and grow in practice and lack a sense of professional honor.

Its emergence is to make up for the problems that are difficult to eliminate under the traditional decoration methods.

For a project that takes an average of 3-5 years to return to its capital, missing any golden week or holiday is a great loss.

So, how can hotel investors strictly control the decoration period, take a quick step and seize the market? Today we will share with you a method of rapid hotel decoration and Renovation – precast decoration.

Traditional decoration requires a large number of raw materials to be processed on site.

Each step should be carefully supervised and inspected in time.

In China, decoration is a relatively traditional industry.

If any link goes wrong, it will increase the maintenance cost and affect the user experience.

Source of construction comparison 2: traditional decoration and technology are uneven, which many people may not understand.

All walks of life are entering the industrial 4.0 era.

Let’s see how it eliminates the crux of “slow” traditional decoration one by one.

Because these processes are wet operations, they will be affected by the weather.

Therefore, it will not cause the trouble of construction errors and rework..

Source: Nanchang decoration industry association with the stability of the domestic epidemic and the development of tourism, the hotel industry has also moved from recovery to prosperity again.

Many people are considering investing in hotels, and many old hotels that have been operating for many years are going to be renovated to meet the needs of users under consumption upgrading.

Lack of ventilation may endanger the health and safety of users, and will cause greater losses in case of accidents.

Generally speaking, it needs to experience: decoration design → determination of the construction party → hydropower construction → tile construction → carpentry construction → paint construction → finished product installation → land reclamation and cleaning → soft decoration purchase → fine cleaning → housewarming.