3.

Finally, in terms of workers’ management cost, because precast decoration can reduce the requirements for workers’ experience, relatively speaking, younger and better educated workers can be employed; Moreover, as the process of each link is closer to the traditional decoration, it is easier for workers to schedule in time (different links of the same project) and space (between different construction sites).

2.

The appearance change of precast decoration is more convenient, and some effects that are difficult to achieve by traditional technology can be achieved through the use of new materials, new technologies and new processes.

Due to the high dependence on factory production, the weight of later installation process in the factors that determine the project quality is relatively reduced, so the final project quality stability is higher than that of traditional decoration.

(3) High variability, easy local renovation to meet new needs.

In the long run, the maintenance and operation costs of precast decoration are lower.

Source: Zhihu first defines the characteristics of precast decoration: 1 The materials used for precast decoration are mainly semi-finished products (parts), precast parts, etc., and there are relatively few on-site fabrication.

In the long run, the labor cost of precast decoration will be lower.

Based on the characteristics of industrial production, the R & D results of cast decoration parts are highly reusable, and manufacturers have more power to improve product functions to win market competition.

Appearance 1 The appearance diversity of precast decoration is not as good as that of traditional decoration technology, but it is relatively easy to make up for.

However, although the traditional decoration can achieve relatively personalized decoration results on the premise of investing more energy and money, the precast decoration can get better completion quality with lower investment, so that more funds can be invested in personalized configurations such as furniture and furnishings.

2.

Round Bar Ferrule

The materials and processes used in precast decoration may be inferior to traditional decoration in absolute performance in some aspects, but due to the characteristics brought by dry installation and standardized production, precast decoration has these advantages in later maintenance and operation: (1) the process difficulty and material cost of repair and replacement are low.

2.

Precast decoration is easier to increase R & D investment, and the functionality of parts is stronger than traditional decoration.

In terms of historical experience, the cost of these materials will be lower than that of on-site small workshop operation.

On site construction of precast decoration is mainly dry installation.

In addition to the space of kitchen and bathroom, it is difficult to achieve the results similar to the traditional process on the top decorative finish.

Precast decoration is mainly based on standardized operation, with relatively few customized components.

The design difficulty of precast decoration is relatively lower, and the overall design level is more stable.

From the following three aspects, compare the precast decoration with the traditional decoration: economy 1 In the long run, the cost of precast decoration materials will be lower.

Practicality 1 The quality stability of cast decoration parts is higher than that of traditional decoration.

3.

(2) The decoration completion data is highly standardized, the project information is relatively easy to transfer, and the labor cost of later maintenance is lower.

3.

The materials required for precast decoration are more suitable for industrialized large-scale production.

The appearance of the finished surface of the ground and wall has been basically the same as that of the traditional decoration process.

The gap between the final completion effect and the traditional decoration is not unacceptable.

From the above analysis, the assembled interior decoration will usher in a climax in the future-.

2.

However, in terms of appearance diversity, due to the inherent characteristics of industrial production, it is insufficient compared with traditional decoration.

Traditional decoration highly depends on workers’ experience, and the engineering quality of the same raw materials in the installation level of different workers is very different.

Then, in terms of staff training cost, due to the more unified installation mode of various parts of precast decoration, compared with the training difficulties of qualified workers caused by the traditional decoration, the workers required for precast decoration may have higher requirements on the initial education level, but the workers need to master fewer special skills, There are fewer special conditions to adapt to when entering the industry.

First, in terms of working hours, it will take less time.