China Precast Magnet

Precast Concrete Accessories

[Focus] the air outlet of precast buildings has arrived, and the two activities of China Construction Third Engineering Bureau have caught

On March 29, the 10th Wuhan International Green Building Materials Expo was held in Wuhan International Expo Center.

Wire Lifting Loop

Let’s have a look! Green investment company of China Construction Third Engineering Bureau made its debut in Wuhan International Construction Expo.

3.

It introduces the international popular Si residential system, takes the lead in the residential experience of science and technology for 10 years, meets the three-star standard of green construction, and successfully sets up the 2016 science and technology project plan assembly building science and technology demonstration project.

5 process management informatization adopts the project management information system and remote video monitoring system to realize the remote supervision of the project by the owner, the supervisor and the general contractor.

Luo Hong, deputy general manager of China Construction Third Engineering Bureau, visited the exhibition area.

Long press the identification QR code and pay more attention..

On March 29, the Ministry of housing and urban rural development issued three documents: the action plan for precast buildings in the 13th five year plan, the measures for the management of precast building demonstration cities and the measures for the management of precast building industrial bases to comprehensively promote the development of precast buildings.

1.

China Construction Third Engineering Bureau Green Industry Investment Co., Ltd.

Liu Zhifeng, President of China Real Estate Association, Qu Yong, executive director and general manager of Luneng Genfu real estate, and Tang Jinguo, executive general manager and Deputy Secretary of the Party committee of Beijing company of China Construction Third Engineering Bureau, observed the scene.

The delegation visited the project safety experience hall, quality model exhibition area and floor assembly model room, and learned about the on-site assembly construction technology and “five modernizations” management of the project department.

To say that the construction industry is currently the hottest “tuyere”, precast buildings must be one of them.

At present, the 12 #, 14 #, 15 # buildings have been capped, and the prefabrication rate of the project has reached 25% and the assembly rate has reached 65%.

made an appearance and demonstrated advanced precast building technologies and businesses such as integral bathroom, precast floating window and smart home.

The pilot observation meeting of century old residential brand undertaken by China Construction Third Engineering Bureau project will be held from March 30 to March 31, Jinan Luneng Lingxiu City P2 project of Beijing company of China Construction Third Bureau successfully hosted the on-site observation meeting of China’s Centennial residential brand pilot project, and more than 100 construction peers focused on the highlights of the assembly construction of the project.

About 278 tons of foundation reinforcement and 3700 cubic meters of foundation concrete are saved, and the building energy saving rate is more than 75%.

On site observation highlights display quality model display area project introduction and ALC board measured actual quantity ALC board introduction ALC board process introduction and accessories display ALC exterior wall board Si internal light steel keel insulation wall laminated floor formwork support and reinforcement binding model roof engineering model precast stairs are so hard, point a praise and go! China Construction Third Engineering Bureau ∣ dare to be the first in the world and always strive for the first place.

The factory assembled component manufacturer of part production uses the information management system to establish the unique identity of components through coding, so as to realize the coordinated deployment and tracking management of the whole process of precast components from production, logistics to installation.

Compared with the traditional construction technology, the industrialization of buildings saves 25% of the total construction water, 32% of wood and 10% of the investment of the traditional steel pipe frame,; Compared with the traditional cast-in-place structure, the self weight of the structure is reduced.

In the past two days, China Construction Third Engineering Bureau also has two activities related to precast buildings.

According to the notice on further accelerating the development of precast buildings just issued by Wuhan municipal government, from April 1, civil buildings within the Second Ring Road, civil buildings in key functional areas outside the Second Ring Road, public welfare buildings invested by the government and independent affordable housing projects will be built, In the supply of land, it shall be clearly constructed in the assembled way.

On the morning of March 29, he Xuehai, Deputy Secretary General of Suizhou municipal government, and his delegation appreciated the advanced concept and technology of the green investment company and looked forward to the later cooperation.

On the afternoon of March 30, Luo Hong, deputy general manager of China Construction Third Engineering Bureau, visited and affirmed the development of green investment company.

On site construction assembly, formulate the standardized assembly process of “analysis, acceptance, transportation, hoisting and welding” to realize the assembly construction of main PC structure and ALC wallboard.

The process standards, construction drawings and measured results are made into two-dimensional codes and pasted on the site for managers and workers to consult at any time, so as to realize the whole process informatization performance management.

There was an endless stream of visitors.

Jinan Luneng Lingxiu City P2 project is a centennial residential brand pilot project of Luneng group.

4 Mechanical and electrical integration of structural decoration our company independently develops Bim and FC systems for prefabrication, overall transportation to the site and direct installation, so as to realize the mechanical and electrical integration of structural decoration.

Deepen the design standardization, use BIM software to deepen the design of cast structure, generate production drawings in batch and automatically count the quantities, improve the work efficiency of designers and realize visual deepening design.

2.

The visitors experienced the “Smart Mirror”, which can automatically start the bathroom exhaust fan, adjust the lighting brightness and hot water temperature in the bathroom, and tap it gently to appear various news, weather forecast and map navigation.

Related Posts