[forwarding] notice on organizing the application of typical engineering cases of precast buildings
2.
Contact: Chi Yong, Tel.: 0591-87677113, address: room 817, Kaijie building, 189 Hudong Road, Gulou District, Fuzhou, email: 7539615@qq.com 。 III.
application conditions (I) the typical engineering cases applied shall meet the following conditions: 1.
Actively apply the key technologies of new building industrialization and intelligent construction, as well as the general contracting and whole process consulting mode.
The application unit shall provide written application materials (in duplicate, printed on A4 paper, stamped with official seal and bound into a volume) and electronic files to the competent department of housing and urban rural development in the district city where the project is located before May 31.
The relevant matters are hereby notified as follows: I.
3.
(2) projects that meet the following conditions shall be declared first: 1.
(2) application materials.
2.
II.
(III) application procedure 1.
There are major technological innovations or construction by assembly, with obvious effect of improving quality and efficiency.
4.
6) or the measures of Fujian Province for the administration of precast building evaluation (Trial) (min Jian [2020] No.
It is evaluated as above class A in accordance with the national evaluation standard for precast buildings, or more than one star in accordance with the administrative measures for the evaluation of precast buildings in Fujian Province (for Trial Implementation).
other requirements: Publishing typical engineering cases of precast buildings is an important means to strengthen publicity and promotion, guide and promote the high-quality development of precast buildings in our province.
The competent departments of housing and urban rural development of cities divided into districts shall actively organize the application and guide the application units to do a good job in case preparation in accordance with the requirements of this circular.
4.
Assembly construction of main vertical stressed concrete components, or assembly decoration.
4) have passed the identification in the design stage, and the precast construction has been completed or is being implemented.
The assembly technology system adopted by the project is mature, applicable and reliable, the quality and safety management system is sound, and there are no quality and safety accidents.
Preparation outline for typical engineering cases of precast buildings annex of the office of Fujian Provincial Department of housing and urban rural development on May 10, 2022.
The project construction unit or the design, construction, general contracting and whole process engineering consulting units agreed by the construction unit shall be responsible for the application.
Application form for typical engineering cases of precast buildings 2.
The project is innovative in the application of precast technology, and has mature experience that can be copied and popularized to solve the difficult problems in the development of precast buildings.
Annex: 1.
3.
The applicant shall fill in the application form of typical engineering cases of precast buildings (see Annex 1 for details), and prepare the cases according to the requirements of the preparation outline of typical engineering cases of precast buildings (see Annex 2 for details), focusing on the application scenarios, technical system characteristics, innovation points of case implementation, practical problems solved and application results, so as to fully show the advantages and value of the precast construction method, and achieve accurate text expression The data are detailed and reliable, with pictures and texts.
Declaration method (1) declaration subject.
The single building area of the project shall not be less than 10000 square meters or the group building area shall not be less than 30000 square meters.
2.
Click the blue word to pay attention to the construction bureaus of our districts and cities, and the transportation and Construction Bureau of Pingtan Comprehensive Experimental Zone: in order to summarize the experience and practice of precast buildings in various places and give play to the exemplary role of typical projects, after research, it is decided to collect and publish a number of typical engineering cases of precast buildings in the whole province.
The project shall be in accordance with the evaluation standard for precast buildings (GB / t51129-2017) The measures of Fujian Province for the administration of industrial building identification (Trial) (min Jian [2015] No.
The construction of the project by assembly is conducive to “two lifting and two reduction”, which has typical demonstration significance.
The competent department of housing and urban rural development of cities divided into districts shall conduct preliminary examination on the application materials, recommend the best ones, and summarize and submit the written application materials (in one copy) and electronic documents to the industry Office of our department on June 10.