4.

2) The software realizes the addition of [truss reinforcement specific gravity setting] in [specific gravity setting] of [reinforcement setting], the addition of truss reinforcement specific gravity setting, and the built-in 22 common truss reinforcement specification specific gravity parameters, covering all user business scenarios; Support to modify the diameter, height, width and other parameters of upper and lower chord and web reinforcement according to the drawing requirements, and the software can automatically calculate the specific gravity; New reinforcement drawing number in reinforcement drawing number library – [11.

New value summary of 033 version 1) business expansion: new special-shaped precast beams 2) efficiency improvement: new identification of precast columns, sleeves and embedded parts table 3) accurate quantity increase: new calculation of laminated plate truss reinforcement 04 products use the relevant [cast module] as an additional module of Guanglianda BIM civil engineering measurement platform gtj2021 to help users quickly realize the modeling and calculation of cast construction projects; If you do not have permission to use this module in your software, please contact your local sales or service personnel for details.

The software provides a series of precast components in the assembly, and provides customers with a comprehensive and professional assembly BIM calculation model.

Get the latest industrial policies, hot spots, software skills, business exchanges and other information of assembly.

Identify precast columns 1) business introduction precast columns are common precast components in assembled integral frame structures, which are usually used in public building projects such as factories and schools; According to the analysis of drawings, it is found that in the layout plan of precast columns, there are at least 10 precast columns on the first floor and more than 100 precast columns, with an average number of more than 50.

2) The software realizes the addition of [identification sleeve and embedded parts table] in the attribute list of precast components [sleeve and embedded parts], directly identify the sleeve embedded parts table on the deepening drawing through the frame pulling operation, quickly input information, and the recognition rate is more than 95%; Identification steps: click the properties of sleeve and embedded parts, click the pull box of identification sleeve and embedded parts table, select the table, confirm to pop up the identification window, check the information, and click identification to complete the input of sleeve embedded parts information.

Flat End Socket

3.

The quantity and specification of embedded parts and grouting sleeves will affect the unit price of precast components.

After the precast beam is hoisted and placed, the upper concrete shall be poured and tamped to make it connected as a whole.

Calculation of truss reinforcement of laminated slab 1) business introduction truss reinforcement consists of one upper chord reinforcement, two lower chord reinforcement and web reinforcement on both sides, which are resistance welded into a reinforcement welding skeleton with inverted “V” section.

Special shaped precast beam 1) business introduction composite beam is a beam poured and tamped with concrete in two times, which is made into precast beam in the Prefabrication Yard for the first time; The second time is at the construction site.

It is a precast reinforcement style in laminated slab.

Identification of sleeves and embedded parts table 1) business introduction embedded parts are precast components.

Welcome to join: Guanglianda gtj2021 assembly official communication group (QQ): 95917044 material: Guanglianda measurement and housing construction products department copywriter: Haoran editor: Yiqiu review: Feifei ▼ Click“.

The corresponding reinforcement drawing can be selected according to the truss reinforcement form given in the deepening drawing; According to the truss reinforcement table in the detailed drawing, enter the truss reinforcement information in the “precast reinforcement” attribute of laminated plate (precast base plate) through identification or manual method to automatically calculate the length of truss reinforcement.

2) The software realizes the addition of [new special-shaped precast beam] under the precast beam component of [precast module]; Support concave, T-shaped, L-shaped and other special-shaped section forms; The precast beam and cast-in-situ beam are overlapped to realize the modeling of composite beam, and the civil engineering and reinforcement are automatically deducted, so the calculation is more accurate! 2.

2) The software realizes the addition of [identify precast columns] and [check precast columns] for precast columns.

Common section forms: rectangle, T-shape, concave shape, L-shape, etc., among which concave shape is the most common.

Grouting sleeves, hooks, nails, wire boxes, conduits, bolts and other items embedded in components during factory pouring.

New function introduction of 023 version 1.

Gtj2021-3 version value live broadcast playback: https://jzkt.fwxgx.com/courses/1875001 Product introduction [precast module] is attached to gtj2021 civil engineering measurement platform.

In the detailed drawing of laminated plate, one part gives the overall length of truss reinforcement, and the other part divides the truss reinforcement into upper and lower chord reinforcement and web member reinforcement to give the length respectively.

Through the identification of the layout plan, the elements are automatically drawn to reverse the construction of components, and the recognition rate is more than 90%; Identification steps: Click to identify the precast column → extract the sideline → extract the label → automatic identification → input the prefabrication height → identify and reverse the component.

Therefore, it is necessary to count the quantity of grouting sleeves and embedded parts.

In the detailed drawing of precast components, the information of embedded parts and grouting sleeves on the drawing is usually marked in the form of tables.

Make the cost of cast projects more efficient and accurate.

[quantity of truss reinforcement report] according to the project drawings, input the truss reinforcement information in the laminated plate (precast base plate), summarize and calculate, and then check the quantity in the cast report; In the report, the truss reinforcement is divided into upper and lower chord reinforcement and web member reinforcement, which are classified and summarized according to the grade diameter.

As the most common component of cast projects, laminated plates are basically required by users with cast projects to calculate truss reinforcement.

It aims to provide customers with precast building measurement products that meet three-dimensional modeling and intelligent quantity calculation, and quickly solve the problems of difficult and cumbersome operation.

Truss reinforcement] add three truss reinforcement drawing numbers, including one truss reinforcement and two web reinforcement.