From 2013 to 2018, the proportion of China’s labor force fell from 73.9% to 71.8%; Within ten years, the average wage of urban unit employment increased by 2.57 times, and the compound annual growth rate reached 10%.

The data of the proportion of China’s working population in the total population comes from: the data of the average wage of urban unit employees in 2008-2017 of the joint economic and Social Council (RMB) comes from: the National Bureau of statistics, and Keynes theory points out that wages are downward rigid, and the transfer of rural labor force to cities has slowed down significantly, The annual net increase of migrant workers decreased from 12.45 million in 2010 to 1.84 million in 2018.

Integrated design, precast production, assembly installation and information management are the main features of assembly decoration.

The traditional production mode is gradually disconnected from the acceleration of industrial innovation, while the most discussed new productivity mode is “assembly decoration”.

In addition to the consumption of building materials, at present, the vast majority of buildings still use the traditional cement mortar construction method, which not only has a long construction period, but also consumes a lot of manpower, and the environmental pollution is also quite serious.

This is a battle of efficiency, experience and cost launched by new technology, new ideas, new policies and new directions to the traditional decoration industry.

Facing the huge market demand, industrialization has become a way to maximize the decoration efficiency and reduce the cost.

The traditional decoration market has experienced more than 30 years of development.

In addition, the enterprises themselves do not have the ability of quality delivery.

Whether at the national, market, industry or user level, there are higher requirements and standards for construction industrialization.

2.

Coil Insert

If the decoration industry continues to use the traditional construction methods, there is likely to be pressure on employment.

The change in the number of labor force population is also a reminder that the labor dividend is fading.

Home decoration is a typical labor-intensive industry.

The intervention of assembly will make the home decoration industry form a pattern of medium and low-end decoration industrialization, fine and manual high-end market.

The assembly type, a seemingly unfamiliar word, will be related to everyone’s daily life in the future.

A large number of enterprises ignited a false fire with the help of capital, and finally died one after another.

In the traditional wet decoration, each decoration site is a small production workshop, and the product quality depends on the skills of construction personnel in each process such as water, electricity, wood, tile and oil.

The pollution problem of traditional construction industry is serious, and it is imperative to complete the construction industrialization.

In essence, industrial production thinking replaces on-site processing thinking and modularizes the house structure space, The integrated parts are installed through industrial production, which greatly reduces the construction period, reduces the uncontrollability of workers’ technology, and reduces the labor cost and material cost.

It may also be a reorganization after the original unstable brand pattern is completely broken up.

3.

The impact of assembly technology on the whole decoration industry will continue to intensify.

Will precast interior decoration subvert the whole decoration industry? The answer must be yes – low efficiency will be replaced by high efficiency.

However, looking at the development of the industry, it is still in a development stage of subcontracting at all levels, poor management level and low efficiency.

With fewer and fewer traditional craft employees and less and less non renewable material resources, it is urgent for the construction industry to change the inherent decoration mode.

If the assembled interior decoration technology and products can be truly recognized and accepted by consumers, it will be possible to realize large-scale.

During the two sessions in 2019, the changes in the number of labor force population deserve the attention of the whole industry: from the supply side, the population of working age has continued to decrease, with a cumulative decrease of about 28 million since 2012.

Assembly technology can be said to be a process or an idea of industrial construction.

02 the future potential of precast interior decoration the construction industry brings 60 trillion output value to the world and 20 trillion growth to China’s GDP every year.

The decoration method provided by assembly is the transformation from on-site service of craftsmen to industrialized production.

01 is the assembled built-in air outlet really coming? In the past few years, in the context of the transformation and upgrading of traditional industries, the decoration industry has received short-term attention and bets from the capital market because of its large market scale, but it has not brought too many changes to the industry.

Each company has different understanding and implementation methods.

With the development of home decoration industry for nearly 30 years, non-standard operation has always been one of the biggest pain points of the industry.

The data show that the direct energy consumption of buildings in China has increased from 10% in the late 1970s to 30% in recent years.

Whether it is the conceptual innovation brought by the Internet or the upgrading driven by technology, delivery and landing is still the most difficult problem to overcome.

One way to realize industrialization is to develop assembly technology..

The labor supply side is insufficient and the bonus of construction workers has faded.

The future development demands of the construction industry will mainly focus on the realization of industrialization.

If building materials are added, it is expected to be about 40%, that is to say, about 1 / 3 of China’s energy sources are consumed in the construction industry.

At present, the advantages of precast interior decoration are extremely prominent in standardized and large-scale decoration projects, such as long-term rental apartments, pension apartments, hotels, etc., which can maximize the advantages of precast interior decoration, greatly shorten the construction period, and make the project enter the operation state quickly and reduce costs.

03 obstacles to the development of China’s traditional construction industry 1.

Different companies will build their own assembly products from different angles, different customer positioning and different structural analysis.

In the context of industry 4.0, the industrialization road of the large residential industry will take the assembly type as the main path, extending upward to architectural design and construction, downward to include home decoration and local renovation.