Intelligent construction – new trend of domestic decoration in the future: Precast interior decoration
The decoration effect is the same.
Comparison between traditional decoration and cast overall decoration Figure 3 separation of pipeline and structure – breaking the traditional separation of pipeline and structure: that is, equipment and pipelines are not embedded in the building structure, but filled in the gap between the six sides of the cast space and the supporting structure.
It changes the traditional way of connecting water, mud and sand.
All localities across the country have issued more than 120 policies to promote the implementation of the policies, including tax incentives, land support, special funds, etc.
According to the traditional decoration method, it takes at least three months to decorate a suite, but the precast decoration method only takes 15 days, shortening the construction period by more than 70%.
The precast overall decoration has unique advantages.
1.
The problem of the diversity of structural forms of the actual picture of the decoration project effect: the problem that the assembled building is difficult to promote at present is that the shape of the component structure is relatively single, and more is the standardized component mold, which cannot be customized..
The decoration effect is the same.
The factory shall prepare the necessary materials for the precast overall decoration in advance, including waterproof chassis, wallboard, ceiling, various sanitary wares and functional accessories, and then directly assemble them on site by dry method.
According to the normal process, a suite can be decorated in about 15 days by adopting precast overall decoration.
The original traditional decoration is on-site construction, which takes a lot of time in the preparation of materials.
Decoration materials are all high-grade stone or ceramic glazing materials; The frame is made of composite materials, which is close to the foundation wall and has a small gap from the wall; The inner wall is pasted with high-grade stone or ceramic glazing materials; The waterproof chassis is made of solid composite materials; It doesn’t need to be raised and close to the ground, which solves the disadvantages of the traditional integral bathroom that gives people a sense of plastic and empty drum.
Through material prefabrication, dry construction, pipeline and structure separation and other construction processes, the construction period is shortened by two-thirds compared with the traditional decoration process, which greatly saves man hours and labor costs.
In the tide of building industrialization and precast buildings vigorously promoted by the state, precast buildings have ushered in new opportunities.
New urban residences must be fully decorated and delivered, and the waterproof design of toilets will take up to 20 years.
It solves the pain points of complicated traditional decoration links and long construction period.
It can not only quickly shorten the construction period, but also greatly reduce the cost of investment.
It meets the aesthetic needs of the public for fine decoration housing, and also lays a foundation for the cultivation of the overall bathroom C-end market.
Factory prefabrication and on-site assembly of parts – the biggest advantage of precast overall decoration is that it can greatly shorten the construction period.
Facing the problem of material defects: in recent years, with the improvement of the overall bathroom production technology, domestic manufacturers began to reduce various production costs, and the gross profit margin continued to rise; Various manufacturers have launched color steel plate and ceramic tile composite board products, laying the foundation for the overall decoration to enter the residential project.
Why is the construction period of precast overall decoration so much shorter than that of traditional decoration.
The target is divided into several space modules.
This is undoubtedly a good choice for residents who want to check in early.
Dry construction — breaking the traditional wet decoration method, dry construction refers to the “dehumidification operation” during repair and construction, which no longer requires water, cement, paint, paint and other traditional materials.
Since 16 years ago, the state has continued to pay attention to the development of precast buildings, and the implementation of precast buildings can effectively implement the policy of “three removal, one reduction and one compensation”.
2.
Assembly type overall decoration assembly type overall decoration is a new decoration mode with the main characteristics of standardized design, industrialized parts and assembly construction to improve the quality and efficiency of the project.
Finally, all these components are sent to the construction site for assembly and embedding.
The original traditional decoration is on-site construction, which takes a lot of time in the preparation of materials.
All decoration components of each module are precast in the factory, including floors, wallboards, ceilings, etc.
Factory prefabrication and on-site assembly of parts – the biggest advantage of precast overall decoration is that it can greatly shorten the construction period.
How to solve the dilemma of precast overall decoration? At present, the main pain points of China’s overall market focus on the following eight major problems: structural diversity, material shortcomings, waterproof sealing and water leakage, drainage blockage, exhaust and odor prevention, material parts and processing quality, manhole, installation and installation team quality.
According to the action plan for precast buildings in the 13th five year plan, precast buildings will account for 15% of new buildings in 2020.
Why is the construction period of precast overall decoration so much shorter than that of traditional decoration.
1.
It does not damage the structure and is easy to maintain.
Precast interior decoration: the decoration effect is high-grade without plastic feeling.
The project decoration real-time effect picture assembled overall decoration assembled overall decoration is a new decoration mode that is characterized by standardized design, industrialized parts and assembled construction to improve the quality and efficiency of the project.
It is widely used in the fields of apartments, economic chain hotels, medical treatment and fine decoration real estate, especially in cold areas and high altitude areas.
At the same time, the construction improves the efficiency.
Moreover, the dry construction eliminates the use of paint, solvent and paint, removes formaldehyde, benzene, DMF and other harmful substances from the source, and lives immediately after installation, truly realizing environmental protection and health, that is, to live immediately after installation.
The construction period is shortened quickly and the labor cost is reduced.
The factory shall prepare the necessary materials for the precast overall decoration in advance, including waterproof chassis, wallboard, ceiling, various sanitary wares and functional accessories, and then directly assemble them on site by dry method.
The overall interior decoration effect is higher than the traditional decoration.
