The lecturer introduced Gaoyang Structural Engineer (PPVC project) with 9 years of experience in precast architecture.

Gaoyang has been engaged in the design, construction and project management of precast architecture in Singapore CAA technology private Co., Ltd., Robin Village Development Co., Ltd.

Once again, let’s feel the architectural charm of Singapore.

The main projects involved in the construction include: miduo school hollow floor project, Sophia residence private apartment, archipelago private apartment, bange C20 & c22hdb project, ecosanctuary private apartment, sembawangn3c8hdb project, daintreeresidences private apartment PPVC project, etc.

Lecture 3: classic case analysis of the application of precast design and technology in public buildings in Singapore.

and Qingjian International (Nanyang) Group Development Co., Ltd.

Course key points: • limitations and precautions in the design of precast buildings • key points of fabrication and on-site installation of precast components • example analysis: Cai Yaozhong, architect, planner and manager of construction department, lecturer of Singapore Xingyao Changi, graduated from the Department of architecture of Shanghai Tongji University in 1988.

It is best to learn from and absorb.

After the course “green sustainable design and technology in Singapore” received a warm response from everyone.

Course content and tutor introduction Lecture 1: development research and technology application of precast buildings in Singapore, as well as the development status at home and abroad.

This online course consists of four courses, which will demonstrate the promotion and application of assembly design and technology in Singapore from multiple levels, angles and cases.

In recent years, the development of precast buildings is a major change in the construction mode, and the country is also vigorously promoting the development of precast buildings.

Environmental protection: • dry on-site assembly to reduce dust, reduce the discharge of wastewater, waste gas and solid waste, and improve the working environment of construction personnel.

Key points of the course: • application of precast components in buildings other than residential buildings • example analysis: Binhai Bay lakeside viewing platform, Binhai Bay Garden artificial tree, Pickering Hotel, marinaoneresidence viewing platform • Lecture 4: field process and design and construction experience of the project of precast design and technology application.

Beautiful: • factory prefabrication with high precision, controllable error, millimeter level, controllable construction color, and durable It is predicted that the appearance effect of assembly type is especially better than that of cast-in-situ technology.

Singapore precast design and technology {PC (precast concrete structure) in order to provide government housing for the market at low cost and high efficiency, the concept of precast building began to be introduced into the Singapore government housing project in the 1980s..

Key points of the course: • ecosanctuary apartment project; • Singapore HDB project, taking sembawangn3c8 as an example, thoroughly analyzes various standards and implementation rules formulated by Singapore housing authority for precast block houses; • Singapore PPVC (modular assembly building), take daintreeresidences as an example to share the advantages and disadvantages of PPVC construction method.

Flat Steel Anchor

Many projects have won the “construction excellence award” issued by the construction authority of Singapore.

Key points of the course: • briefly describe the development of precast buildings in Singapore and the current situation of the industry of precast buildings in Singapore; • Incentive and mandatory measures adopted by the government to promote precast buildings, and corresponding policies and regulations issued; • • buildability score and constructability score The respective advantages of Singapore and China in the development of precast buildings and the future of Singapore’s construction industry after the epidemic; Lecture 2: classic case analysis of the application of precast design and technology in residential buildings in Singapore.

The main projects involved in the construction include Singapore Xingyao Changi (docking with safdi Office), Singapore linear housing (docking with Danxia Jiansan Office), Singapore Ministry of the interior and the General Administration of police, Countess apartment project, etc.

Later, he transferred from design to construction, worked in an international contracting company and participated in the construction of large-scale projects.

Singapore is recognized in the world as a country with a better solution to the housing problem.

And how to efficiently do a good job in assembly is a problem worth studying and exploring! Advantages and costs of assembly type: • greatly reduce labor dependence and improve construction quality; • Building area can be increased; • The single module of assembly decoration can be disassembled, replaced and recycled, which is convenient for maintenance and upgrading and reduces the cost of secondary transformation.

He immigrated to Singapore in 1994 and engaged in architectural design at the housing authority of the government of Singapore (HDB) and Bama Dana design company.

Among them, the development concept of precast housing and housing policy are the main reasons.

Search architecture and Singapore Shili society jointly launched the online course “Singapore assembly design and technology application”.

He participated in the compilation of the required reading of vigorously promoting precast Architecture – system, policy and development at home and abroad.

Cycle: • compared with the traditional method, the factory production is not affected by bad weather and other natural environment, the construction period is more controllable and the production efficiency is high; • Have a relatively complete standard design system to shorten the time of design stage; • Due to the high production accuracy of components, plastering and mortar leveling can be avoided in the later stage, and the finishing layer construction can be carried out directly on the components, so as to shorten the construction period of decoration stage.