Compared with traditional decoration, especially low budget projects, the problem of rising costs can not be ignored.

Round Bar Ferrule

If it helps you, please share it! No copying without permission, no illegal or profitable use, welcome.

The ground raised floor is installed, and the ground ceramic tile is paved after the installation.

The following is attached with the detailed drawing of the solution for the assembled decoration kitchen: of course, the above are only some personal views at present.

With the continuous development of science and technology, the continuous research and development of new materials and new processes, and the continuous improvement of the upstream and downstream industrial chain, this view will be overthrown one day in the future.

For the whole project, cost really plays a decisive factor.

At present, the development of the whole industry is not mature.

The cost of assembly decoration must be higher than the cost of painting; For example, the aluminum gusset plate ceiling in the kitchen and bathroom, which has been used in the market for more than 10 years, is also dry construction and belongs to assembly decoration.

The new process combined with the traditional finish is a good method, which can not only achieve the purpose of dry construction, but also meet the owner’s requirements for the finish.

Next, Lao Zhu takes the precast kitchen decoration project implemented by a well-known real estate company as an example, hoping to bring inspiration and help to you.

Let’s see the finished product effect after the installation.

It is enough to use part of the ground overhead system in the cast decoration to composite ceramic tiles.

The calcium silicate decorative panel is installed (2mm seam is reserved between the plates, and the beautiful seam treatment is done later).

Assembly decoration is not to do assembly for assembly.

Under the condition of limited budget, there is no need to use new materials and processes with higher cost; For another example, the owner can accept the traditional ceramic tile floor better, and there is no need to use new materials to replace it.

Everything from reality is the fundamental requirement and concrete embodiment of Marxist epistemology.

Precast decoration is an emerging industry.

After all, our original intention of precast decoration is not only to let consumers experience better quality and higher efficiency, We should also use industrialized manufacturing to bring consumers the ultimate cost performance.

For example, in the project budget, for the basic top painting project, the project budget controls the price, and the manual addition of materials costs tens of yuan per square meter.

It should be just past the embryonic stage and in the seedling development stage.

When it comes to assembly decoration, many people will think that assembly decoration must be the whole house assembly.

As can be seen from the above figure, the traditional decoration method is adopted for the water pipeline, and the pipe is buried after the wall is grooved, The purpose is to reduce the thickness of the finished surface after the installation of the wall decorative panel (15-20mm less than the way of pipeline separation).

At present, more than 1000 sets of phase I have been installed in the project, In addition to the cast decoration used in the kitchen, other parts use the traditional decoration.

For example, the Motorola V998 mobile phone listed in 2000 was priced at 6500-7000 yuan at that time, but now the new love crazy 13 is no more than that price.

In fact, this is a misunderstanding.

So, I think it is the right development direction to selectively implement precast decoration without affecting the whole project cost.

The upstream and downstream supporting industrial chain is not perfect, and the procurement cost of raw materials is still too high.

There is no doubt that the assembled decoration is the inevitable development direction in the future.