The general code for civil buildings has been issued. Precast buildings must adopt “four modernizations” parts and components
8、 Article 3.1.2, 6.2.8, 6.2.19, 6.2.23 and 7.1.2 of technical specification for plastic door and window engineering (jgj103-2008).
articles 4.3.1, 6.7.4, 6.8.6 and 6.8.9 of the uniform standard for design of civil buildings (gb50352-2019).
If the relevant provisions in the current engineering construction standards are inconsistent with this specification, the provisions of this specification shall prevail.
9、 Article 4.1.7 and 4.1.8 of technical specification for ceiling engineering of public buildings (jgj345-2014).
Fixing Socket Cross Pin Nail Plate
At the same time, the following mandatory provisions of the current engineering construction standards shall be abolished: I.
4、 Article 8.2.2 and 9.1.2 of technical code for application of building glass (jgj113-2015).
The full text of the general code for civil buildings is as follows: Source: Chief Planner of the website of the Ministry of housing and urban rural development: Cha Yanping; editor in charge: Cheng Xiaoli..
The Ministry of housing and urban rural development recently issued an announcement approving the general code for civil buildings as a national standard, numbered gb55031-2022, which will be implemented from March 1, 2023.
7、 Article 3.1.2, 4.12.1, 4.12.2 and 4.12.4 of technical specification for aluminum alloy doors and windows Engineering (jgj214-2010).
This specification is a mandatory engineering construction specification, and all provisions must be strictly implemented.
6、 Article 5.5.1 of technical code for artificial panel curtain wall engineering (jgj336-2016).
3、 Article 3.0.2 and 4.3.3 of design standard for catering buildings (jgj64-2017).
5、 Article 3.1.4, 3.1.5, 3.6.2, 4.4.4, 5.1.6, 5.5.1, 5.6.2, 6.2.1, 6.3.1, 7.1.6, 7.3.1, 7.4.1, 8.1.2, 8.1.3, 9.1.4 and 10.7.4 of technical code for glass curtain wall engineering (JGJ102-2003).
It is specified in the building components and structures that the precast roof shall be designed to resist wind exposure, and corresponding fixing measures shall be taken for each structural layer.
In the basic provisions of the code, it is pointed out that precast parts and components with integration, modularization, standardization and generalization shall be adopted for precast buildings.
2、 Article 3.1.7 and 4.2.8 of code for design of garage buildings (jgj100-2015).
