4.

Introduction to dyno (loading into revitpribbon) here we mainly introduce the usage of dyno plug-in, and load the tools prepared in the previous course into revitpribbon through operation demonstration.

7.

Introduction to dynamorebar node this part focuses on the nodes related to the reinforcement created in the dynamorebar node package, and demonstrates its usage with a case.

Introduction to the composition of truss reinforcement laminated plate here introduces the components of truss reinforcement laminated plate, and explains in detail the functions of plate bottom reinforcement, truss reinforcement, lifting point reinforcement, embedded wire box and so on.

5.

UI making of laminated slab reinforcement tool this part introduces how to use the UI related nodes of datashape to make the UI interface for the tools prepared in the previous course, integrate all the inputs in the tool, and prepare for adding it to revitribbon in the future.

Wengong and bimbox once worked together to produce a popular science course of structural design.

My understanding of architectural structure depends entirely on the 13 popular science courses of literary workers! 2022-02-14 especially in the deepening design of precast components based on BIM, the literary workers not only have rich experience in the design and development of truss reinforced composite plates, but also have rich practical experience in the development and application of deepening tools for other precast components, such as precast stairs, precast bay windows and precast shear walls.

At the same time, a friendly UI interface can further enhance the ease of use of the tool and facilitate dissemination and promotion.

Key points of deepening design of truss reinforced composite slab this part makes an in-depth analysis from the aspects of floor slab splitting, thickness requirements, truss reinforcement layout requirements, reinforcement configuration principles and methods at the bottom of the slab, setting position of lifting point stiffeners, structural method of connection between composite slabs and support, floor opening method, method when there is no beam under the wall, etc.

If you are interested in assembly design, or want to have some practical practice of dynamo node design and UI packaging, please don’t miss it.

Compilation of composite slab splitting tool this paper introduces the method of splitting the floor slab with dynamo.

Introduction to datashape node (UI making) this part is to explain the relevant nodes about UI in the dateshape node package, and make an operation demonstration of the effects that can be achieved by different types of nodes combined with simple cases.

You can run the plug-in without opening dynamo or dynamo player.

6.

10.

Through the study of this part, you can parametrically split the regular floor slab in the project, and realize the batch creation of reinforcement in combination with the reinforcement generation tool in the previous course.

9.

It will demonstrate how to add multiple types of inputs to the tool, so that our tool can run directly through dynamo player.

There are also some charging plug-ins on the market that can do the modeling of truss reinforced laminated plates.

Hello, this is bimbox.

3.

Here we further increase the ease of use and dissemination of the program and improve the efficiency of subsequent use..

Swift Lift Anchors

We also introduced Wengong’s professional experience and areas of expertise.

Truss reinforced composite plate is the most widely used component in precast buildings.

He has explored the field of BIM structural parameterization for many years, and his team has also obtained a number of software copyrights in parametric design.

After the introduction of the structural science popularization course, the stationery has also gained a large number of fans.

We found Wen Zhibin, an old friend who has been exploring the field of dynamo structural parameterization for many years, to cooperate in a course to help small partners without relevant deepening design experience to make their own dynamo truss reinforced composite plate modeling tool.

Dynamo custom node production this part is the production method and precautions of dynamo custom node, which paves the way for subsequent courses.

Parametric modeling of laminated slab reinforcement this part explains the idea and method of parametric modeling of slab bottom reinforcement and truss reinforcement.

Packaging of laminated board tools this part introduces how to package the parametric tools made in the previous course.

Therefore, today’s course dynamo truss laminated plate modeling tool development and application is available.

What I want to recommend to you today is a good course just released, which mainly uses dynamo to solve the problem of component design in assembly design.

1.

The course provides two splitting ideas, splitting by quantity or length.

It is troublesome to create reinforcement in Revit, especially for truss reinforcement of laminated plate, and dynamo can complete this work conveniently and quickly with the help of visual programming platform.

2.

01 ▼ course introduction the course is divided into 11 sections.

8.

Everyone hopes to quickly master the knowledge of cross-border fields and teach the unique skills of truss laminated plates.

With the vigorous implementation of precast buildings by the state, many projects have put forward the requirements of assembly rate.

The course not only talked about the preparation process of dynamo truss reinforcement modeling tool, but also demonstrated the preparation of laminated plate splitting tool, derivative design, packaging of user-defined nodes, production of UI interface and the method of loading dyn files into revitpribon.

If enterprises or component factories need their own standards, they can also DIY their own laminated plate modeling tools based on dynamo, so as to improve the design efficiency.

The literary workers will first explain the idea of parametric modeling and explain it closely in the process of demonstration.

It is the core chapter of the course.

I hope that through this course, I can also teach you some advanced aspects of dynamo.