are processed in the factory.

Image source: pixabay copyright free picture overall kitchen system: the kitchen ceiling and wall are assembled without cement mortar, green and environmental protection; The surface decoration can also use thin method stone and ceramic tile hanging board.

5 Management informatization, whether design or production, transportation, storage and construction, shall be managed by informatization, and materials shall be reasonably used and construction period shall be reasonably arranged.

(Contributed by the research center of the design company) Assembled decoration, also known as industrial decoration, has gradually formed with the development of industrialization.

are simulated by BIM system and then placed with an order, which can achieve zero cutting on site and only need to complete the assembly; The site shall be truly pollution-free, garbage free and environmentally friendly.

However, the project design, construction process and completion effect vary greatly, especially the final completion effect is not satisfactory, which makes people question the development of precast decoration.

Photo source: pixabay copyright free picture The overall bathroom system: the bathroom adopts the overall waterproof chassis, and the special anti-odor floor drain and sewage casing are closely connected with the waterproof chassis, completely eliminating the hidden leakage of the bathroom.

The construction assembly is managed by the factory, and the assembly actions and procedures are standardized, and the industrial workers carry out dry construction on site.

The wallboard shall be assembled on site, and cement mortar shall be avoided, which is green and environmental protection; The surface decoration can also use thin method stone, ceramic tile hanging board or other materials.

Stone and ceramic tiles are no longer cut on site.

The stairs shall be manufactured in a factory and assembled in a reasonable time according to the construction process nodes.

Guide No.

The design of internal components is modular and standardized, which is convenient for large-scale production, stacking, transportation and assembly in the factory.

The parts shall be numbered uniformly in the interior design stage and implemented according to the number in the production and installation stages.

The cabinet and wall are reserved with hanging pieces, and the whole kitchen is dry and efficient.

It rose after World War II, and developed rapidly in Japan in the 20th century, gradually forming a complete assembly system.

Ceiling light trough system: ceiling light trough components are processed and disassembled, and assembled on site.

Wall cladding system: the partition foundation system is produced in factory; The surface layer can be green and environment-friendly integrated decorative panel, or it can also use high-quality factory-made wood veneer or stone and other components.

China’s residential construction has entered the era of precast decoration, which has led to the spread of precast decoration in full swing.

Wardrobe, door, wood veneer, stone, etc.

2.

The construction is fast, and the on-site assembly is free of wet operation, waste and pollution.

The cabinet is finely designed, the upward-turning cabinet door is convenient to use, the bottom space can be fully used, and the wall socket uses the thickness of the keel, and the hidden treatment, so the space is cleaner.

Integrated fine decoration, water supply and drainage, electrical, overall kitchen, and overall bathroom.

The research on assembly-type subject has far-reaching significance for the hardbound design of residential buildings.

How to do a good job of precast decoration? This article makes a summary from the perspective of design, production, construction and management.

49 precast buildings reduce energy consumption and have broad prospects for development.

For precast decoration, it is necessary to prefabricate the base and surface layers of the roof, wall panel and ground in the factory, and transport the special assembly parts required for prefabrication to the construction site for dry assembly; All woodwork completely abandons the process of painting on site.

Only by adhering to people-oriented and practicing refinement and perfection can we continue to provide residents with green hardbound products in line with the spirit of the times and better meet the people’s needs for a better life..
.

In order to do a good job of precast decoration, we must achieve five in one: design standardization, factory production, construction assembly, decoration integration, and management informatization.

4.

Rubber Recess Former

Standardized interior decoration design shall be coordinated and unified with architectural, structural and electromechanical integration design.

Compared with traditional decoration, precast decoration has outstanding advantages: only industrial workers who can strictly implement the construction process are required on site, which greatly improves efficiency and reduces the on-site construction period; Integrated production of parts system, high degree of industrialization, more stable quality and more economical raw materials; On-site assembly, no noise and dust pollution, green and environmental protection; The raw materials are based on metal and cement, which can be recycled and reused, more energy saving, and more in line with the national sustainable development strategy.

Ground system: adjustable feet support customized ground, and water heating pipes can be arranged in the overhead floor.

Components can be managed by barcode, and the code corresponds to the drawing, and assembled on site; The water pipe, electric pipe, etc.

3.

Assembled decoration increases the depth of drawings, pays attention to the integrity of parts, integrates, modularizes and parameterizes the design, and closely cooperates and cooperates with all disciplines.

The production of factory products shall be unified, and the models and specifications of the parts shall be unified, and the design standards shall be unified.

1.

Interior decoration design shall participate in the plane design and house type design of individual buildings during the architectural scheme design, integrate the electromechanical conditions, assist in the accurate positioning of electromechanical terminal points, coordinate the layout of pipelines with electromechanical devices, adhere to the concept of separation of the main structure of the building from the interior decoration system and equipment pipelines, and verify that there is no conflict between buildings, equipment, pipelines and decoration.