Cement pier cleaning car | Price of cement pier cleaning car | Manufacturer of cement pier cleaning car
The “click” sound of the gear lever is the sound of the solenoid valve when it acts.
Satisfactory cost performance.
Cement pier cleaning car | Cement pier cleaning car price | Cement pier cleaning car manufacturer’s auto automatic transmission is generally used to prevent the wrong operation of the transmission lever function and prevent the driver or passenger from causing safety accidents due to the wrong operation of the car.
The distance between the brush roller and the guardrail is constant.
Many cleaning cars will brush the tires with a layer of free tire oil after washing the car, which is called the bright dust on the tires, and can also maintain the tires.
Most of the local tire oil used for cleaning the car is of poor quality, but it will corrode the tire and wheel hub, increase tire wear and contact tire life.
The guide roller is designed and installed, and its outer end face is 100-150 mm shorter than when the brush bristles are unfolded, so as to ensure that the brush bristles can effectively clean the guardrail surface during the cleaning operation.
Therefore, if the brake pedal is not pressed at the “P” position, the shift lever cannot move.
3 Step down the vehicle clutch, press the low pressure water pump power take-off electromagnetic switch (the lower right corner of the steering wheel), Release the clutch of the vehicle, take the power from the power take-off, and the water pump starts to work.
It can be delivered to the door by stages.
The upper part is equipped with: Jiangxi Isuzu (JX493G) auxiliary engine, 57Kw, German Pinfu high-pressure pump, double-sided cleaning device, four groups of roller sweep clamping isolation guardrail rotating brush, high-pressure water auxiliary washing, and electro-hydraulic control to clean the isolation guardrail, to ensure that the isolation guardrail is cleaned in all directions without any dead corner.
The rubber is soluble in grease solvent.
2 Turn on the power switch of the operation box, pull up the front water spraying button and the rear water spraying button (the water cannon switch needs to be manually operated) as required.
Whenever the brake pedal is pressed, the solenoid valve will make a sound..
.
After the work is completed, disconnect the power take-off first, and then close the valves.
Cement pier cleaning car | price of cement pier cleaning car | manufacturer of cement pier cleaning car | price of cement pier cleaning car | manufacturer of cement pier cleaning car | manufacturer of cement pier cleaning car “Direct sales by powerful manufacturers, reliable quality, assured after-sales service.
The auxiliary engine clutch adopts program-controlled automatic clutch, which is user-friendly and improves the working reliability and service life of the auxiliary engine.
Low pressure water spraying operation 1 starts the vehicle engine, and the air pressure reaches more than 6Kpa.
In addition, during the cleaning process, because the guide roller and the guardrail are always in contact, the friction force of the brush on the guardrail surface is uniform, ensuring the cleaning quality of the guardrail, and making the cleanliness of the cleaned guardrail surface reach more than 90%.
The intelligent control system, electrical system and hydraulic system are under centralized control, and the operation is simple.
Welcome to call for consultation” Little Dolika guardrail cleaning car, chassis adopts Chaochai 102 hp engine, wheelbase: 3308mm, Chassis model (EQ1070SJ3BDF) 7.00R16 steel wire tire.
The vehicle moves forward at a suitable speed.
Some children are confused when moving.
With the swing arm type guardrail cleaning device, the driver can operate easily and quickly.
