[Focus] The on-site observation meeting on quality and safety management of precast buildings in Hubei Province was held in the project of
It is mainly composed of tripod, step board, protective mesh and skirting board.
As the first precast demonstration project in Jingmen City, Beijing Bangyuan Community Phase II Project has played a leading role in the development of precast buildings in Jingmen City and even in Hubei Province.
Zhang Hong, Deputy Secretary of the Party Leadership Group and Deputy Director General of Hubei Provincial Department of Housing and Urban Rural Development, pointed out that Jingmen Beijing Bangyuan Community Project has made a good demonstration in terms of EPC management and quality and safety control of precast construction projects.
On November 8, the meeting was held in the second phase of Beijing Bangyuan Community, Jingmen, Hubei, China Construction Third Engineering Bureau Green Investment Corporation.
During the production of precast wallboard components, embedded parts of water and electricity pipelines and railings should be embedded in advance to avoid secondary slotting.
China Construction Third Engineering Group Co., Ltd.
Fabricated solid sample area Fabricated solid sample area Fabricated building exterior wall adopts full concrete structure, precast exterior wall is standardized in the factory, accuracy error is controlled at millimeter level, and the surface is flat and smooth.
of the shear wall structural system assembled in the observation site highlight display component display area are precast in the factory and assembled on site.
Comprehensive electricity experience Comprehensive electricity experience, simulating the electric shock reaction of human body, and improving the prevention awareness of on-site construction personnel.
dares to be the first in the world forever..
The first underground floor and 1-2 floors above the ground adopt cast-in-place reinforced concrete structure, and the 3-18 floors above the ground adopt precast precast structure.
The components produced in the factory of the training base are hoisted on site, connected and fixed by sleeve grouting, and then cast in situ to form an integral house.
Zhao Jun, member of the Standing Committee of Jingmen Municipal Party Committee, said in his speech that he would take this meeting as an opportunity to actively explore new methods, new models and new ways for the quality and safety management of precast buildings, and promote the development of precast buildings in Jingmen to a new level.
Phase II has 8 buildings and 15 units.
Jingmen City is one of the first batch of demonstration cities for precast buildings in China and the only city selected in Hubei Province.
Zhang Yuxuan, Deputy Director of Jingmen Municipal Commission of Housing and Urban Rural Development, exchanged experience in precast quality safety management from three aspects of Jingmen precast building system construction, quality assurance and mechanism innovation.
Wang Tao, Secretary of the Party Committee and General Manager of CSCEC Third Engineering Bureau Green Investment Company, introduced the positive exploration of CSCEC Third Engineering Bureau in the field of precast buildings.
He said that he would further accelerate the layout of assembly plants, further strengthen industrial linkage, further enrich assembly business units, and promote the development of assembly construction business to a new level with a higher orientation, greater strength and more pragmatic measures.
The external protection system of the cast standard floor of the hoisting outrigger project adopts the outrigger system, and each building is equipped with two floors for turnover.
The use of tower crane for disassembly and installation eliminates the traditional steel pipe external scaffolding system for cast-in-situ construction, and greatly saves the use of steel pipes in the project.
The precast components used include precast exterior walls, precast stairs, and precast balconies, with an assembly rate of 53%.
VR experience VR experience facilities are equipped with 14 experience contents for common injuries in the construction industry, such as falling from height, object strike, electric shock, mechanical injury, collapse, etc., to simulate the whole process of safety accidents in a simulated scene, so that workers can truly feel the effects of construction safety accidents, such as falling, shaking, shaking, etc., so that workers can “safely” experience the process of “unsafe” accidents, and improve their self-protection awareness.
He put forward three suggestions on the development of precast building business in the province: first, actively respond and vigorously promote precast buildings; Second, pay close attention to management to ensure the quality of precast buildings; Third, strengthen measures to prevent production safety accidents.
The exterior walls, interior walls, composite plates, composite beams, stairs, balconies, air-conditioning panels, etc.
Combined with the plastering free process of cast structures, it effectively avoids the common quality problems such as traditional plastering, hollowing and cracking.
More than 500 people, including Zhang Hong, Deputy Secretary of the Party Leadership Group and Deputy Director General of the Housing and Urban Rural Development Department of Hubei Province, Ye Bing, Director of the Provincial Quality and Safety General Station, Zhao Jun, Member of the Standing Committee of Jingmen Municipal Committee of the CPC, Du Zuopeng, Chairman of Jingmen Urban Control Group, Zhang Yuxuan, Deputy Director of the Housing and Urban Rural Development Committee of Jingmen City, Wei Desheng, Deputy General Manager of China Construction Third Engineering Bureau, Wang Tao, Secretary of the Party Committee and General Manager of the Green Investment Company of China Construction Third Engineering Bureau, and representatives of the Housing and Urban Rural Development Committee, quality and safety system and industry enterprises in Hubei Province, attended the meeting.
Project Introduction: Beijing Banghuayuan Community Phase II is the first precast housing project in western Hubei, with a total planned floor area of 145700 square meters, and 1076 housing units can be returned.
As a mode of expanding safety education and training, the safety experience hall in the safety experience area simulates different operating environments, allowing trainees to experience and perceive the safety risks in the building construction environment, improve safety awareness, understand safety precautions, and improve safety skills.