Through decades of development, China’s industrial output value now ranks first in the world.

Solid Lifting Socket Cross Pin

Calm down and you will find that the precast decoration still faces three major challenges.

Traditional decoration has always been a labor-intensive industry, which relies heavily on the personal skills of decoration workers, but the objective fact is that there are fewer and fewer workers.

According to the current situation, the precast buildings account for only about 3% of the newly-built building area in China, which is far from the general requirement of the policy – “30% of the newly-built buildings in about 10 years”.

At the same time, the on-site operation environment is less noise, dust and pollution than the wet operation, and non violent demolition and recycling can be achieved in the future reconstruction.

Lei Jun of tuyere said that pigs can fly when standing on the tuyere.

However, with the development of society and the improvement of population quality, the number of Chinese migrant workers is decreasing year by year.

The process of precast decoration in China once stagnated.

The labor force is greatly reduced.

The practice of Bim and other technologies requires a large amount of research and development funds and time investment.

In 2022, the assembled decoration returned to the public’s view and became popular again.

In the following 50 years, a large number of migrant workers stole the spotlight of precast decoration in the tide of reform and opening up.

For young people, this kind of working environment is free from the taste of the older generation of workers in the agricultural society, which is hated by the younger generation.

First of all, with the transformation of decoration production mode brought by assembly, how to reconstruct the industrial chain in the future will be a comprehensive and complex challenge.

Therefore, the once neglected assembly decoration has been re emphasized by the decoration industry, because it provides a solution to reduce the manpower of the decoration industry: decoration with no emphasis on manpower and heavy industry.

In the on-site installation process, only simple training for workers is required to carry out the assembly smoothly, and the requirements for people are much lower than those of traditional decoration, Any person can complete the whole installation process with simple training.

Different from the traditional decoration, the precast decoration has higher barriers.

Relying too much on external funds will increase the uncertainty of the future of the enterprise, which is not conducive to the scale development of the enterprise and the assembly industry.

There were many onlookers and many voices questioning whether this would be another “false proposition” of Internet home decoration.

It is a common phenomenon in the industry to win projects by means of advance funds.

It has completely entered the working atmosphere of the industrial society, making the work more dignified and no longer dishonorable.

Reconstruction of industrial chain when we compare traditional decoration with assembly decoration, we mainly look at three points: design, supply chain and construction..

Although as a new decoration mode in China, precast decoration faces problems such as industrial chain reconstruction, cash flow pressure and C-end market transformation, the promotion of policy environment and the development of industry 4.0 are irresistible.

The current industry has no supporting facilities, and everyone moves forward alone in this industry, making their own designs, factories, assembly and after-sales.

Of course, after the precast decoration entered the market under the environmental pressure of reduced manpower, its advantages were also greatly highlighted, such as 90% water saving, 80% shorter construction period, 70% lower energy consumption, 60% lower labor cost, and saving delivery cost and time.

From design, R & D, production to assembly, how to cooperate with each link and how to improve the circulation efficiency may require constant coordination or even trial and error among enterprises.

For start-ups, long-term cash flow pressure will hinder their scale development to a large extent.

The Internet home decoration in 2014 was once a gale, although it seems that more chicken feathers are left after the spring tide.

In the 1950s, when Japan started its exploration of precast housing, China introduced this concept.

The entrants can make good use of the first mover advantage, focus on solving the pain points and difficulties in technology, channels, capital and other aspects, and play more potential energy in the 6 trillion decoration market.

Third, it is difficult to transform the assembly type into the C-end market.

It is too early to talk about the C-end transformation of the precast decoration.

In fact, precast decoration is an out and out foreign product.

These advantages in turn became the driving force for the later implementation of the precast decoration.

In relevant policies, it is clearly pointed out that the proportion of precast buildings in China will reach more than 15% in 2020 and 30% in 2026.

Although the era of full decoration paved the way for the development and application of precast decoration in the residential market, facing the demand of C-end market for personalization, the precast mode wants to meet the quality and individuality while maintaining the production efficiency, which needs the support of a strong information system and a mature supply chain system.

At the same time, in the United States, Japan and Europe, However, precast decoration has gradually developed and gained a high market share (80% of new houses in Sweden), and relevant industries have also entered a mature stage.

Assembly decoration enterprises based on engineering channels are often in a relatively weak position in the face of b-end real estate developers.

Since 2016, the government has adopted a series of policies to promote the development of precast decoration in China because it conforms to the national green development goal.

However, this does not prevent optimistic people from transforming their lives and businesses.

According to the data of the two sessions in 2019, the number of migrant workers in China has decreased by 85% in the past decade, and it is still decreasing at a rate of about 28 million each year.

Second, the cash flow problem is also the reason that hinders the rapid development of assembly enterprises, especially start-ups.

Naturally, the labor-intensive industries, such as the decoration industry, are the most affected.

After further polishing and processing, the finished products are moved to the site for assembly, which greatly reduces manpower.

To put it simply, the assembly type decoration refers to the intelligent, mechanized and systematic production of traditional on-site construction modules in the factory.