It is suggested that the modeling software should not be mandatory, but can be changed to the recommended list.

of China Construction Second Engineering Bureau, Professor Senior Engineer, Xiao Yuming, Chief Engineer of Guangxi Construction Engineering Group Co., Ltd., Deng Bin, former Chief Engineer of Guangxi Construction Engineering Group First Installation Co., Ltd., and Electromechanical Review Expert of National Quality Engineering Award Li Xiaoyan, Deputy Secretary-General of Guangxi Construction Industry Federation, Wei Ying, Associate Professor of Guangxi Communications Vocational and Technical College, Wei Weixiang, General Manager of Guangxi Nanning Liangkai Refrigeration Equipment Engineering Co., Ltd., Pan Yuanyan, Deputy General Manager, and 40 line representatives from the main editing units attended the meeting.

Everyone said that the lecture of Secretary-General Zheng was featured with clear theme, prominent focus, rich content, strong guidance and pertinence, which benefited the preparation staff participating in the training.

At the same time, the key technologies involved in the Standard, the focus of the later work, and the problems to be solved are discussed, laying a solid foundation for the next work.

At the meeting, through the full exchange and discussion of the participants, the specific division of responsibilities was clarified, the preparation outline was determined, and the key time nodes and schedule for the preparation of the Standard were clarified.

On January 9, 2023, the kick-off meeting of the group standard of Guangxi Association for Engineering Construction Standardization, the Standard for Installation of Assembled Machine Rooms (hereinafter referred to as the Standard), which was edited by China Construction Second Engineering Bureau Co., Ltd.

of Guangxi Construction Engineering Group and the mechanical and electrical recheck expert of the National Quality Engineering Award, suggested that the Standard should include the contents of fire fighting or water supply and drainage precast machine rooms, and update the corresponding chapters.

Chen Xueying, Assistant General Manager of Guangxi Construction Co., Ltd.

The preparation of the Standard will effectively carry out the adaptability research between China and ASEAN, It is also applicable to the construction of computer room installation in China and ASEAN countries…

Finally, Secretary-General Zheng Yujie gave a on-site lecture on “Guangxi Engineering Construction Standards Formulation and Standards Internationalization Knowledge Training”, and the preparation staff studied carefully.

The meeting was presided over by Chen Xueying, assistant general manager and professor-level senior engineer of Guangxi Construction Co., Ltd.

Secretary-General Zheng Yujie affirmed the preliminary research and preparation of the Standard, and put forward four requirements for the Standard: first, the technical parameters and indicators of the Standard should not be lower than the national standard, and should be coordinated with the national standard industry standards, and the standard technical data should be fully certified in practice; Second, the standard belongs to the engineering construction standard, which should be prepared according to the format and requirements of the engineering construction standard; Third, the editor-in-chief unit should coordinate well, all the editor-in-chief units should actively participate, the compilation personnel should be fixed and seriously participate, pay attention to the schedule of the preparation of the Standard, and complete the preparation with quality and quantity guaranteed; Fourth, as an important indicator of the internationalization of standards and a standard for ASEAN application and adaptability research, the Standard should be prepared in English.

Fixing Socket Cross Pin Nail Plate

Deng Bin, the former chief engineer of the First Installation Co., Ltd.

of China Construction Second Engineering Bureau, Chen Xueying, General Manager Assistant of Guangxi Construction Co., Ltd.

The meeting was held online and offline.

On behalf of the preparation team, Cheng Ming, an engineer of China Construction Second Engineering Bureau Co., Ltd., reported to the General Assembly the background of the establishment of the Standard, the preliminary basic work, the situation of the preparation unit, the framework and main contents of the preparation outline.

and Guangxi Construction Industry Federation, was successfully held in Nanning.

of China Construction Second Engineering Bureau.

Xiao Yuming, chief engineer of Guangxi Construction Engineering Group Co., Ltd., also put forward his own suggestions.

It is reported that in order to promote the application of the standard in ASEAN countries, the chief editing unit has invited Vietnam Fumeixing Development Co., Ltd., Vietnam Pacific Construction Consulting Co., Ltd., Hong Kong Huayi Design Consultants (Shenzhen) Co., Ltd., ACAConceptAps and other four units as participating units.

Zheng Yujie, Vice President and Secretary-General of Guangxi Association for Engineering Construction Standardization, Shen Zhan, Chief Engineer of Guangxi Construction Co., Ltd.

He pointed out that the size, weight and overall plan of the precast machine room should be arranged; It is recommended to arrange main equipment and pipelines in the system; Optimized precast machine room, simple installation and reasonable layout.

of China Construction Second Engineering Bureau, delivered a welcome speech on behalf of the chief editor of the Standard, and expressed welcome and gratitude to the leaders and experts who participated in the meeting.